20m 2 Deck Veneer Roller Dryer 1m3/h
20m 2 Deck Veneer Roller Dryer running without Thermic Oil Heater or Steam Boiler has the drying capacity 0.8-1.1m3/h. It uses waste wood / Briquette fired Air Heater-Biomass Burner. It eliminates heat loss by directly heating air and supplying to dryer instead of indirect heating of Oil or water. Ofcourse, the veneer roller dryer can run on steam boiler or thermal oil heater too.

Product Description 

Shine Veneer Roller Dryer is continuous roller veneer dryer for core veneer and face veneer. After veneers are peeled from fresh logs by the peeling machine, the veneer dryer is responsible for reducing the moisture content to a proper condition before gluing for plywood making. The working width and working length of the wood veneer drying machine can be customized according to the specific drying capacity requirement needed by the different customers.

The shine roller veneer drying machine is equipped with our patented combustion heating system-biomass burner. The biomass burner can burn all kinds of waste wood, waste veneer, tree barks, straw chips and so on. In this way, the drying cost is significantly reduced as no need coal, electricity, gas or oil as the fuel. Furthermore, it also solves the problem of waste accumulation in wood processing plant by burning waste wood. 


veneer drying


veneer dryer


Biomass burner


fuel cost comparison veneer dryer


Main Technical Parameters 

Model No.



Veneer Roller Dryer


Core & Face Veneer Drying

Number of Sections


Number of Decks


Working Width


Roller material

Q235B, φ89 steel pipe

Heating section length


Cooling section length


Veneer thickness


Initial moisture content


Final moisture content

10%adjustable based on the requirement

Heating material & drying temperature

Waste wood, 140-200℃ adjustableTemperature control accuracy ±5. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/h)

1 m³/h

Heat Requirement (10000 Kcal/h)


Veneer delivery speed

5-22m/min (adjustable)

Hot air blower

Power: 7.5KW(4pc

Cold air blower


Traction motor

Power :5.5KWfrequency control(2pc

Air Intake Fan 

Power : 11KW(1pc)

2 Ton Biomass Burner

Power: 15KW

Total power


Actual Electricity Consumption

About 50 Kw per hour

Overall Dimensions (L*W*H)


All specifications, dimensions & design characteristic are subject to change without prior notice.


Our Advantages

1. Shine biomass veneer dryer has the features of high productivity, energy efficiency, lowest drying cost and perfect drying effect. The composite cost is only about $6 -12/cubic meter, which can improve customers'profit space greatly.

2. Biomass burner is the exclusive patent invented by Shine Machinery Co., Ltd in China. The biomass burner can burn all kinds of waste wood directly to reduce the fuel cost to the most. Compared to steam type or thermal oil type veneer dryer, the drying cost is reduced greatly. No need steam boiler, gas, coal or oil. It is of high efficiency of veneer drying, low fuel consumption and energy/cost saving. The drying cost is the lowest. Both the steam type and the thermal oil type need customers to provide heat sources and furnaces, among which the steam type needs the boiler with high cost, while the thermal oil type needs 2 kilns. After two heat exchanges, some heat loss is not conducive to achieving the ideal drying effect; compared with the two, biomass combustion burner not only saves the cost, but also achieves the ideal drying effect.

3. SHINE heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.

4. Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.

5. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness, free of splits and the surface is in good condition for gluing. Shrinkage and casehardening is kept to a minimum and collapse and honeycomb are avoided.

6. Main electrical appliances are selected international brands. Less maintenance is required for this type of Dryers with no Veneer Jamming leading to lesser Downtime.

7.  After-sales service: remote operation is available on request, Network interactive services, regular customer visits, skilled service team can solve the failure at the first time.

8. We have a professional R&D team that can design different models according to customer’s special requirement. Perfect after-sale service system can supply 24h online service, remote operation is available on request, regular customer visits, sufficient spare parts supply in time.

Project Cases 

veneer roller dryer site