Plywood Core Veneer Drying Machine
The biomass burner is Shine patented product. It can burn all kinds of waste wood directly to reduce the drying cost mostly. Compared to steam type or heat conduction oil type veneer dryer, the drying cost is reduced greatly.

Product Description 


Veneer Roller Dryer is continuous roller veneer dryer for core veneer and face veneer. After veneers are peeled from fresh logs by the peeling machine, the veneer dryer is responsible for reducing the moisture content to a proper condition before gluing for plywood making. The working width and working length of the wood veneer drying machine can be customized according to the specific drying capacity requirement needed by the different customers. Shine heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.

 

veneer dryer machine

 

biomass veneer dryer

 

roller veneer dryer

 

Biomass burner

 

Main Technical Parameters 


Model No.

GTH30-20

Type

Veneer Roller Dryer

Application

Core & Face Veneer Drying

Number of Sections

4

Number of Decks

2

Working Width

3000mm

Roller material

Q235B, φ89 steel pipe

Heating section length

16m

Cooling section length

4m

Veneer thickness

0.6-8mm;

Initial moisture content

60-80%

Final moisture content

10%(adjustable based on the requirement)

Heating material & drying temperature

Waste wood, 140-200℃ adjustable, Temperature control accuracy ±5℃. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/h)

1 m³/h

Heat Requirement (10000 Kcal/h)

28-38.5

Veneer delivery speed

5-22m/min (adjustable)

Hot air blower

Power: 7.5KW(4pc)

Cold air blower

Power:5.5KW(1pc)

Traction motor

Power :5.5KW,frequency control(2pc)

Air Intake Fan 

Power : 11KW(1pc)

2 Ton Biomass Burner

Power: 15KW

Total power

72.5KW

Actual Electricity Consumption

About 50 Kw per hour

Overall Dimensions (L*W*H)

20X4.5X2.27m

All specifications, dimensions & design characteristic are subject to change without prior notice.

Our Advantages


1. Shine biomass veneer dryer has the features of high productivity, energy efficiency, lowest drying cost and perfect drying effect. The composite cost is only about $6 -12/cubic meter, which can improve customers'profit space greatly.

2. Biomass burner is the exclusive patent invented by Shine Machinery Co., Ltd in China. The biomass burner can burn all kinds of waste wood directly to reduce the fuel cost to the most. Compared to steam type or thermal oil type veneer dryer, the drying cost is reduced greatly. No need steam boiler, gas, coal or oil. It is of high efficiency of veneer drying, low fuel consumption and energy/cost saving. The drying cost is the lowest. Both the steam type and the thermal oil type need customers to provide heat sources and furnaces, among which the steam type needs the boiler with high cost, while the thermal oil type needs 2 kilns. After two heat exchanges, some heat loss is not conducive to achieving the ideal drying effect; compared with the two, biomass combustion burner not only saves the cost, but also achieves the ideal drying effect.

3. SHINE heat exchanger adopts step by step heat transfer, and the specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be uniformly emitted to the veneer. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.

4. Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.

5. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness, free of splits and the surface is in good condition for gluing. Shrinkage and casehardening is kept to a minimum and collapse and honeycomb are avoided.

6. Main electrical appliances are selected international brands. Less maintenance is required for this type of Dryers with no Veneer Jamming leading to lesser Downtime.

7.  After-sales service: remote operation is available on request, Network interactive services, regular customer visits, skilled service team can solve the failure at the first time.

8. We have a professional R&D team that can design different models according to customer’s special requirement. Perfect after-sale service system can supply 24h online service, remote operation is available on request, regular customer visits, sufficient spare parts supply in time.

Project Cases 


veneer roller dryer site