1. Home

4 Deck 38M Veneer Roller Dryer and Heat Source Biomass Burner

4 Deck 38M Veneer Roller Dryer and Heat Source Biomass Burner
The 38m 4 deck veneer roller dryer using biomass burner as the heat source has the drying capacity of 5m3/h. Our veneer dryer can also work on the steam boiler or thermal oil heater.

Product Description

4
Four layer 38 m veneer roller dryer and 10 ton stove
The 4 Deck 38M Biomass Burner heated Veneer Roller Dryer has the drying capacity of 4.5m3/h. The total production cost(labor, fuel and electrictiy power) is only USD6-USD12 per cubic meter by utilizing the biomass burner as the heat source. The automatic feeder and collection system are installed with the 4 deck veneer roller dryer which saves the labor cost greatly and improves the feeding and collecting efficiency. FYI, the 3 deck veneer dryer can run on steam boiler or thermal oil heater too.   
MORE +

36M 3Deck Mesh Belt Veneer Jet Dryer Machine

36M 3Deck Mesh Belt Veneer Jet Dryer Machine
The 36m 3 deck continuous veneer mesh belt dryer has the drying capacity of 3-4m³. It is usually used for the continuous ribbions before cutting. The mesh belt dryer is designed especially for the face veneer at the thickness of 0.2-1mm. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.

The 36m 3 deck continuous veneer mesh belt dryer has the drying capacity of 3-4m³. It is usually used for the continuous ribbions before cutting. The mesh belt dryer is designed especially for the face veneer at the thickness of 0.2-1mm. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.

3 Deck 32M Veneer Roller Dryer with Biomass Burner

3 Deck 32M Veneer Roller Dryer with Biomass Burner
 The 3 Deck 32M Veneer Roller Dryer is heated by Biomass Burner and has the drying capacity of 4m3/h. The 3 deck veneer roller dryer is designed to ensure the maximum quality and productivity and highest possible energy efficiency for both furniture and plywood veneer manufacturing. The 3 deck dryer has the higher drying capacity compared to the 1 and 2 deck dryer while pricing is more favorable at the same time compared to 4 deck veneer dryer. FYI, the veneer dryer can also work on the steam boiler or thermal oil heater.  

Product Description 

Mesh
3Deck 26M Mesh Belt Veneer Dryer Machine
Veneer drying line is important machine in plywood processing. When you peeling get fresh veneer, for long stock, need remove water and moisture, so you need core veneer dryer or drying line. Shine 3 deck veneer dryers have the salient features of higher price performance ratio, higher drying capacity. 26m 3 deck mesh belt dryer is suitable for drying thin face veneer, which can dry 2-3m³ veneer per hour. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness.
MORE +

26m 2 Deck Stainless Steel Mesh Belt Veneer Dryer

26m 2 Deck Stainless Steel Mesh Belt Veneer Dryer
For the thin veneer, the mesh belt dryer will be more suitable. The mesh belt veneer dryer is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The drying capacity of 26m 2 deck veneer dryer can achieve 1.5-2m³/ h. The veneer after drying is flat, moisture content is up to national standard. We can customize the dryer models and design the right dryer for customers according to the specific drying capacity, veneer thickness and moisture content requirement.  

For the thin veneer, the mesh belt dryer will be more suitable. The mesh belt veneer dryer is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The drying capacity of 26m 2deck veneer dryer can achieve 1.5-2m³/h. The veneer after drying is flat, moisture content is up to national standard. We can customize the dryer models and design the right dryer for customers according to the specific drying capacity, veneer thickness and moisture content requirement.  

20M 2 Deck Stainless Steel Mesh Belt Veneer Dryer

20M 2 Deck Stainless Steel Mesh Belt Veneer Dryer
The mesh belt veneer dryer is one of the main equipments in plywood production. It is composed of four parts, which are divided into feeding area, heating area, cooling area and discharging area. The 20m 2 deck mesh belt veneer dryer can dry 1-1.5m³/h and the veneer afer drying can achieve better drying effect.

The mesh belt veneer dryer is one of the main equipments in plywood production. It is composed of four parts, which are divided into feeding area, heating area, cooling area and discharging area. The 20m 2 deck mesh belt veneer dryer can dry 1-1.5m³/h and the veneer afer drying can achieve better drying effect.

3 Deck 26M Continuous Veneer Roller Dryer

3 Deck 26M Continuous Veneer Roller Dryer
The 3 deck 26M Veneer Roller Dryer heated by biomass burner has the capacity of 3m3/h. The automatic feeder and veneer collection system are installed to improve the feeding and collecting efficiency and save the labor cost greatl. The 3 deck veneer roller dryer can also run on steam boiler or thermal oil heater.

Product Description 

4Deck
24M 4 Deck Biomass Veneer Drying Machine
24m 4 deck veneer dryer machine has the drying capacity 4.5m3/h. The veneer roller dryer can run on biomass burner, steam boiler or thermal oil heater too. 4 deck veneer dryer is equipped with automatic feeding machine, which not only ensure the highest efficiency in feeding the veneer into the wood veneer dryer and save labor cost greatly.
MORE +
Subscribe to